|
|
Pioneers of quality headers featuring the “Mandrel Bend” System.
Our modern workshop incorporates the very latest equipment available, including
our aircraft quality computerised Benders with revolutionary, patented,
vertebrate type mandrel, ensuring perfectly round bends, previously unavailable
in Australia.
Additional
Features include:
1) Precision Laser cut and machined thick flanges to eliminate leaking and
warpage.
2) All headers are jig welded for guaranteed fitment and are checked prior
to shipment.
3) Comprehensive fitting instructions with V8 sets together with hi-tensile
header bolts.
4) Big bore pipes available for most popular V8 models.
5) Emission hook-ups provided where applicable.
6) Primary pipes fitted through the flanges.
7) Heat proof finish tested to 1270°.
8) Secondary and outlet pipes fitted over primary and outlet cones.
 Pacemaker
are the only Australian Header manufacturer to manufacture their
products with Pipe Over Cone™
technology copyright number 135712 applies.
The advantages of Pipe Over Cone™ technology are there is no protruding pipe
inside the collector cone, therefore increasing exhaust gas flow and eliminating
turbulence inside the exhaust header. The result is better gas flow and
increased horse power.
Helpful Hints:
1) Read the instruction sheet supplied with the headers.
2) Disconnect the battery.
3) On E.F.I. computer controlled vehicles, use anti-zap device on the
battery before welding to prevent spiking the computer.
4) Make sure the head face is clean before fitting the headers.
5) Use non-silicon based sealant on the face of the header E.F.I. vehicles.
6) Do a final check to ensure ignition leads, clutch cables, power steering
lines and Automatic cooling lines are clear of the headers.
|
