Holden HG-HT Chev Small Block TRI-Y

#PH5302 - Chev Small Block. Manual & Automatic. TRI-Y Design.
ph5302la
ph5302ra
Description

PH 5302 - Holden HG-HT with Chev Small Block. Manual & Automatic. TRI-Y Design.

Part #: PH 5302    
P/Steering: No Gasket: DSF 9
Air Con: N/A Primary Pipe: 1⅝" (41mm)
Oxy Sen: N/A Secondary Pipe: 2" (51mm)
E.G.R: N/A Outlet: 2¼" (57mm)
Y Branch: N/A Fitting Time: 3 Hrs


Note:

  • If required with alt. bracket on LH side order PH 5303
  • Will fit slant plug heads
  • Will fit Powerglide automatic
  • Will fit Turbo 400 automatic if vehicles floor has been cut for correct fitment of automatic
  • Will not fit column automatic unless linkages are modified
  • Will fit with power steering
  • Will only fit with original engine mounting spacers or; PACEMAKER spacers Part number PEMP 307
  • Spacers must be fitted on correct side of vehicle (RH spacer is ¼" higher than LH spacer)


PH5302 & PH5303 headers are designed to fit with a genuine factory starter when fitting to a 153 tooth (10 1/2") flex plate (auto only) or a 153 tooth (13") ring gear (manual only).

PH5302 & PH5303 headers will not fit the genuine factory starter when fitting to 168 tooth (11") flex plate (auto only) or a 168 tooth (14") ring gear (manual only). Pacemaker recommends the use of an after market hi-torque starter. Please choose carefully as not all starter solenoids are in the same position.

MADE BY AUSSIES